Diesel Head Gasket Calls: The Questions We Ask Before You Order

Real calls to our tech support line

Diesels are the hardest head gasket jobs because of how much compression they make. Before a diesel owner orders anything, our founder asks the same short list of questions. These three calls show the questions and why each one matters.

Thermalweld is BBB accredited and A+ rated, and the people who make it answer the phone. These calls are shared without the callers’ names.

Call one: a work diesel slowly losing coolant

The owner had the truck for years. The coolant level had been dropping gradually, with no overheating and no leak he could find.

  • Sudden or gradual? Gradual loss with no overheating is what our founder called a minor problem, caught early.
  • How far over full is the dipstick? That tells him how much coolant is reaching the oil.
  • What are the radiator temperatures? In and out, with a $20 infrared thermometer. A healthy radiator drops no less than 10 and no more than 20 degrees. Outside that, the engine will overheat sooner or later.

Call two: smoke at startup and a dropping coolant level

This owner had not overheated the engine and had no water in the oil. He had smoke for a while after startup and the coolant kept going down.

  • Were you the owner when it started? History matters. An engine that was never overheated is less likely to have a cracked head.
  • Is there water in the oil? None here, which points at a smaller leak.
  • How large is the cooling system? Eight gallons or ten changes which kit fits.
  • Have you already poured something in? A product added on top of antifreeze can leave deposits that have to be dealt with first. Tell us what went in.

Call three: a diesel tractor building pressure

The owner had the tractor for years with no trouble, then a cooling system failure, then pressure pushing coolant out.

  • What failed just before this? A cooling system failure followed by pressure is the typical sequence. The first failure is usually the cause.
  • Do you see steam at the exhaust? Often you do not on a diesel, so no steam does not rule out the head gasket.
  • Can you work it under load? A diesel repair is done with the engine doing its normal work, not only idling.

What every diesel caller hears

You reach the same person all the way through, seven days a week. If the first treatment does not finish the job, we stay with you and go back through the cooling system by temperature. See the warranty.

We do not have final results to report on these three calls, so we are not claiming any.

More on signs of a blown head gasket on a diesel, our diesel formula, the best head gasket sealer for diesel engines and a Ram EcoDiesel call. Watch diesel repairs on video.

Free unlimited tech support from the people who make it

Call (844) 796 7968 with your engine, hours or mileage and symptoms. You talk to the people who make Thermalweld, as often as you need, free.

Mechanics: your first bottle is free. So is the unlimited tech support. thermalweld.com/technicians

More real calls from our tech support line. This page is a guide, not a diagnosis.

Leave a Comment