What Causes a Blown Head Gasket? Usually the Cooling System

Why did it happen?

What causes a blown head gasket? Usually the cooling system fails first

Most blown head gaskets are caused by a cooling system part that failed first: a stuck thermostat, a weak water pump, a clogged radiator, a cooling fan that does not come on, or a cap, radiator or hose that lets the pressure out. The engine overheats and the gasket gives way, and on a high mileage engine an old gasket can also wear out with no overheating at all.

We are the experts in cooling systems: we find what caused the failure, not only fix the gasket. Here are the causes a technician checks, in words a driver and a mechanic can both use.

Why the cause matters more than the gasket

Fix the gasket and leave the failed part in the car, and the new seal usually goes the same way as the old one. That holds whether a shop replaces the gasket for $2,000 to $7,000 or you seal it from the inside. If your engine overheated and nobody found out why, assume two problems until you know otherwise: a blown head gasket and a cooling system part that is still failing.

Cause 1: a stuck thermostat

The thermostat opens to send hot coolant to the radiator. One that sticks closed traps the heat in the engine, the temperature climbs, and the head gasket can be what gives.

Cause 2: a weak water pump

The water pump moves coolant through the engine and the radiator. A weak pump does not move enough of it, so heat builds up in the engine.

Cause 3: a clogged radiator

The radiator sheds the heat the coolant carries out of the engine. A clogged radiator cannot shed it, so the coolant goes back into the engine still hot.

Cause 4: a cooling fan that does not come on

When the car is moving slowly or sitting in traffic, little air passes through the radiator on its own, and the fan does that job. A fan that does not come on at the right time lets the engine run hot.

Cause 5: a cap, radiator or hose that lets the pressure out

Water boils at 212 degrees F. Under pressure the boiling point rises to about 250 degrees F, the same idea as a pressure cooker, so a cooling system has to hold pressure to keep from boiling over. A pressure cap whose seal leaks, or whose spring releases too early, loses that pressure. So does a leaking radiator or a split radiator hose. The coolant boils over, the level drops, and a low coolant level overheats any engine. Before anyone blames the gasket, look at the cap.

Cause 6: high mileage and piston pressure

Not every blown head gasket starts with overheating. The pistons push 100 to 200 psi or more against the gasket on every stroke. On a high mileage engine, over 150,000 miles, an old gasket can simply wear out under that pressure.

Does a blown head gasket cause overheating, or the other way around?

Usually the other way around. Overheating is most often the cause, not the symptom, and exhaust getting into the cooling system does not by itself make an engine run hot. There are two exceptions:

  • So much exhaust builds up that an air pocket forms around the thermostat. Hot coolant never touches it, it never opens, and the engine overheats.
  • Coolant leaves through the tail pipe as steam, the level drops, and the low coolant overheats the engine.

Either way, once the gasket is breached, every mile makes the breach bigger. More on driving with a blown head gasket and white smoke and losing coolant.

Fix the cause, then check the gasket

  1. Repair the part that failed. Thermostat, water pump, radiator, fan, cap or hose. Once it is fixed, the engine usually stops overheating.
  2. Then look for gasket signs. If it still loses coolant, puts white smoke out the tail pipe, runs rough or shows coolant in the oil, the gasket was damaged too. See blown head gasket symptoms.
  3. Confirm it with a test. A block test costs about $10 with a tester most auto parts stores will lend you. A shop charges around $35 to $50, and a compression test runs near $100 or more. Watch how to do a block test, or read how to tell if your head gasket is blown.
  4. Then choose the repair. Replace the gasket, or seal it from inside the cooling system with the head left on. See can a blown head gasket be fixed without replacing it and head gasket repair cost.

Already tried a sealer that did not work?

A repair made while the cause is still in the car usually fails the same way the gasket did. Where other products failed, we help you fix it. Before you pour anything else in, call and tell us what went in, what failed first and what the engine does now.

Free unlimited tech support from the people who make it

Call (844) 796 7968 with your engine, mileage and what happened before the gasket blew. You talk to the people who make Thermalweld, as often as you need, free. Nobody else in the industry offers that. Thermalweld is BBB accredited and A+ rated, and our field technician, Dave Whitmer, has more than 1,100 blown head gasket repairs, and growing.

We are saving livelihoods one blown head gasket at a time.

For mechanics and repair shops

You already know the gasket is often not the whole story. Find the part that caused it, fix it, and seal the gasket with the head on, with our tech support on the phone whenever the job gets tough. Your customer keeps the car, and you keep the job. Unheard of in the industry. Nobody else comes close.

Mechanics: your first bottle is free. So is the unlimited tech support. thermalweld.com/technicians

Need a mobile mechanic? We find one for you.

Call (844) 796 7968 and tell us where the car is. At our cost, we call mobile mechanics in your area, qualify a well reviewed one for your job, and back them with free, unlimited tech support from start to finish. We know of no other head gasket brand that does this. How we find your mechanic

Quick answers

What is the most common cause of a blown head gasket?

A cooling system part that failed first and overheated the engine: a stuck thermostat, a weak water pump, a clogged radiator, a cooling fan that does not come on, or a cap, radiator or hose that lets the pressure and coolant out.

Can a head gasket blow without overheating?

Yes. On a high mileage engine, over 150,000 miles, an old gasket can wear out under 100 to 200 psi or more of pressure from the pistons, with no overheating at all.

Does a blown head gasket cause overheating?

Usually it is the other way around. A blown gasket causes overheating in two cases: an air pocket trapped around the thermostat, or a coolant level that drops because coolant is leaving through the tail pipe as steam.

Can low coolant cause a blown head gasket?

It can. A low coolant level overheats any engine, and overheating is the usual reason a gasket fails. Find out where the coolant is going: a leaking radiator, a split hose, a pressure cap that does not hold, or the gasket itself.

How do I keep a repaired head gasket from blowing again?

Fix the cause first. Repair the thermostat, water pump, radiator, fan, cap or hose that failed, then repair the gasket. If it overheated and you never found out why, call us before you repair anything: (844) 796 7968.

More answers

This page is a guide, not a diagnosis. Call (844) 796 7968 with your engine, mileage and symptoms.