How to Do a Block Test for a Blown Head Gasket
Is it my head gasket?
How to do a block test for a blown head gasket
To do a block test, lower the coolant a little, warm the engine up, seat a tester filled with blue test fluid in the radiator neck, and squeeze the bulb to pull the air above the coolant through the fluid. If the fluid turns yellow on a gas engine, or green on a diesel, combustion gas is getting into the cooling system, and that usually means a breached head gasket.
Most auto parts stores will lend you the tester, and the fluid costs about $10. Here is how to do it right, in words a driver and a mechanic can both use.
What a block test checks
A head gasket keeps combustion gas in the cylinders and coolant in its passages. When the gasket is breached, combustion gas gets into the coolant. The test fluid reacts to that gas and changes color, which is why the block test is also called a combustion leak test or a chemical block test. The fluid is sensitive, so even a small leak usually shows.
When to do one
Do it before you pay for any repair, when you see one of the four signs a technician checks first: you keep adding coolant, white smoke from the tail pipe, a milky coffee look under the oil cap, or rough running with a check engine light. See blown head gasket symptoms.
Do it when somebody told you it is the head gasket but never tested it, too. A $10 test is cheaper than any repair based on a guess.
What is in a head gasket test kit
A clear tester with two chambers, a rubber cone that seals in the radiator neck or the expansion tank opening, a squeeze bulb, and a bottle of blue test fluid. You can borrow the tester at most auto parts stores and buy the fluid, about $10. A shop charges around $35 to $50 to do the same test.
How to do a block test, step by step
- Start with a cool engine. Never open a radiator cap or pressure cap on a hot engine.
- Lower the coolant. Take out enough that the level sits at least an inch and a half below the fill neck. Liquid coolant must never get into the tester.
- Fill the tester. Pour the blue fluid to the line marked on the tester.
- Warm the engine up. Start it and let it idle until it reaches operating temperature.
- Seat the tester. Press the rubber cone firmly into the radiator neck or expansion tank opening, and hold the tester upright.
- Squeeze the bulb. Squeeze it several times to pull the air and gas above the coolant up through the fluid.
- Watch the color. What each color means is below.
- If coolant gets into the tester, stop. Coolant spoils the fluid and the reading. Clean the tester, put in fresh fluid and start again.
- Finish up. Take the tester out, top the coolant back up and put the cap back on. Do not pour used fluid back into the bottle.
Watch Dave do it start to finish: How to do a block test.
What the color means
- Yellow on a gas engine, green on a diesel. Combustion gas is in the coolant. That usually means a breached head gasket. A crack in the head or the block can do the same.
- Stays blue. The test found no combustion gas. If you are still losing coolant, find where it goes: a leaking radiator, a split hose or a pressure cap that does not hold. A shop can also pressure test the cooling system; pressure that drops with no drips points to a leak inside the engine.
Not sure what you are looking at? Call (844) 796 7968 and tell us what the fluid did.
If the test turns yellow or green
- Drive it as little as possible. Every mile makes the breach bigger. See can you drive with a blown head gasket.
- Find what caused it. Most blown head gaskets start with a cooling system part that failed first: a stuck thermostat, a weak water pump, a clogged radiator, a fan that does not come on, or a cap that lets the pressure out. Fix the gasket and leave that part in the car, and the new seal usually goes the same way.
- Then choose the repair. Replace the gasket, or seal it from inside the cooling system with the head left on. See can a blown head gasket be fixed without replacing it and head gasket repair cost.
Already tried a sealer that did not work?
A block test tells you whether the breach is still open. Where other products failed, we help you fix it. Before you pour anything else in, call and tell us what went in, what failed first and what the test shows now.
Free unlimited tech support from the people who make it
We are the experts in cooling systems: we find what caused the failure, not only fix the gasket. Call (844) 796 7968 with your test result, engine and mileage. You talk to the people who make Thermalweld, as often as you need, free. Nobody else in the industry offers that. Thermalweld is BBB accredited and A+ rated, and our field technician, Dave Whitmer, has more than 1,100 blown head gasket repairs, and growing.
We are saving livelihoods one blown head gasket at a time.
For mechanics and repair shops
A block test before every head gasket job protects you and your customer. When it turns, find the part that caused the failure, fix it, and seal the gasket with the head on, with our tech support on the phone whenever the job gets tough. Your customer keeps the car, and you keep the job. Unheard of in the industry. Nobody else comes close.
Mechanics: your first bottle is free. So is the unlimited tech support. thermalweld.com/technicians
Need a mobile mechanic? We find one for you.
Call (844) 796 7968 and tell us where the car is. At our cost, we call mobile mechanics in your area, qualify a well reviewed one for your job, and back them with free, unlimited tech support from start to finish. We know of no other head gasket brand that does this. How we find your mechanic
Quick answers
How does a block test work?
A tester filled with blue fluid pulls the air from above your coolant through the fluid. If combustion gas is getting into the cooling system, the fluid changes color. That usually means a breached head gasket, and sometimes a cracked head or block.
What color means a blown head gasket?
Yellow on a gas engine and green on a diesel mean combustion gas is in the coolant, which usually points to a breached head gasket. Fluid that stays blue means the test found no combustion gas.
Where can I get a head gasket tester?
Most auto parts stores will lend you the tester, and you buy the test fluid for about $10. A shop does the same test for around $35 to $50.
Can a block test give a false reading?
It can if liquid coolant gets into the tester, because coolant spoils the fluid. Keep the coolant at least an inch and a half below the fill neck, and if coolant gets in, clean the tester and start over with fresh fluid.
Does a block test work on a diesel?
Yes. On a diesel the blue fluid usually turns green, not yellow, when combustion gas is in the coolant. Check the instructions with your kit, and call (844) 796 7968 with the result.
More answers
- How to tell if your head gasket is blown
- Blown head gasket symptoms
- White smoke from the exhaust and losing coolant
- Milky oil under the oil cap
- Can you drive with a blown head gasket?
- Can a blown head gasket be fixed without replacing it?
- Head gasket repair cost
This page is a guide, not a diagnosis. Call (844) 796 7968 with your engine, mileage and test result.
