How Long Does Head Gasket Sealer Last? What Makes It Hold

Should I fix it?

How long does head gasket sealer last? What makes a repair hold

Thermalweld is designed to be a permanent repair. How long any head gasket repair lasts depends less on the bottle than on four things: whether the part that caused the failure was fixed, whether the antifreeze came out first, whether the cure was finished, and whether the engine ever overheats again.

We are the experts in cooling systems. We find what caused the failure, not only fix the gasket, because that is what decides whether a repair holds. Here is what a driver and a mechanic can check, one step at a time.

What you read online: a few days to a year

Search this question and you will find every answer from a few days to a year. Writers who test sealers say it depends on the size of the leak, the condition of the engine and how the car is driven, and that heavy loads and high heat shorten it.

The same is true of any head gasket repair, a new gasket from a shop included. Leave the part that caused the failure in the car, and the new gasket can go the same way as the old one.

Six things that decide how long it lasts

1. The part that caused it is fixed

Most head gaskets blow because a cooling system part failed first: a stuck thermostat, a weak water pump, a clogged radiator, a cooling fan that does not come on, or a cap or hose that lets the pressure out. Seal the gasket and leave that part in the car, and the engine overheats again and the new seal usually goes the same way as the old one. On a high mileage engine, over 150,000 miles, a gasket can also wear out from the pressure alone.

2. The antifreeze came out first

Thermalweld does not mix with antifreeze. Flush the cooling system with plain water first, heater core included, then put the treatment in. The easy repair instructions give every step.

3. The cure was finished

The seal finishes over the next three days. Bring the engine up to operating temperature at least four times in that time, then flush the treatment out and go back to antifreeze. The cure and the second flush are part of the repair, not extras.

4. It was caught while the engine still runs

The pistons push 100 to 200 psi or more against the gasket on every stroke, and every mile makes the breach bigger. The repair works while the engine runs, so every mile you wait costs you options. More on driving with a blown head gasket.

5. The cooling system holds pressure

Water boils at 212 degrees F. Under pressure, the boiling point rises to about 250 degrees F. A pressure cap whose seal leaks, or whose spring lets go too early, lets the coolant boil over, and a boil over is how an engine overheats again. Check the cap and the hoses as part of the job.

6. It really was the head gasket, and nothing worse

A block test settles the diagnosis for about $10. Most auto parts stores lend the tester, and a shop charges around $35 to $50. Dave Whitmer, our field technician, shows how: How to do a block test. Then read the dipstick. Five inches or more over the full mark can point to a cracked block, so call before you pour anything in. More on how to tell if your head gasket is blown and milky oil under the oil cap.

How long does it take to work?

The treatment goes in and runs in one session, following the instructions for your engine. Then you drive normally for the next three days and bring the engine up to operating temperature at least four times while the seal cures. After that, flush the treatment out and go back to antifreeze. Diesel engines follow their own steps, so call before you start on one.

If you are asking how long it takes to dry, the answer is the cure: three days and at least four warm ups.

Is head gasket sealer permanent?

Thermalweld is designed to be a permanent repair. What usually undoes a head gasket repair, of any kind, is heat: an engine that overheats again from a part nobody fixed, a cap that will not hold pressure, or a coolant level left low.

Signs a repair is not holding

  • The coolant level keeps dropping after the cure.
  • White smoke from the tail pipe comes back once the engine is warm.
  • The temperature gauge climbs. Pull over and shut it off.

If you see any of these, call (844) 796 7968 before you add anything else. We go through what went in, what the engine does now, and what caused the failure in the first place.

Already tried a sealer that did not hold?

Where other products failed, we help you fix it. Before anything else goes in, call and tell us what went in and what the engine does now.

Free unlimited tech support from the people who make it

Call (844) 796 7968 at any step, before, during or after the repair. You talk to the people who make Thermalweld, as often as you need, free. Nobody else in the industry offers that. Thermalweld is BBB accredited and A+ rated.

We are saving livelihoods one blown head gasket at a time.

For mechanics and repair shops

A comeback costs you the job and the customer. The repair that lasts is the order you already work in: confirm it with a block test, fix the part that caused it, flush, seal it with the head on, finish the cure, and flush again. Call us whenever the job gets tough. Unheard of in the industry. Nobody else comes close.

Mechanics: your first bottle is free. So is the unlimited tech support. thermalweld.com/technicians

Need a mobile mechanic? We find one for you.

Call (844) 796 7968 and tell us where the car is. At our cost, we call mobile mechanics in your area, qualify a well reviewed one for your job, and back them with free, unlimited tech support from start to finish. We know of no other head gasket brand that does this. How we find your mechanic

Quick answers

How long does head gasket sealer last?

Thermalweld is designed to be a permanent repair. How long any repair lasts depends on fixing the part that caused the failure, flushing the antifreeze out first, finishing the cure and keeping the engine from overheating again.

Is head gasket sealer a permanent fix?

Thermalweld is designed to be one. Follow the steps, fix the cause, and call (844) 796 7968 if anything looks wrong after the repair.

How long does head gasket sealer take to work?

The treatment runs in one session, following the instructions. Then the seal cures over the next three days as you drive and bring the engine up to operating temperature at least four times. After that, flush it out and go back to antifreeze.

Why did my head gasket sealer stop working?

Usually the part that caused the failure is still in the car, antifreeze was left in, the cure was cut short, or the damage was more than a head gasket, such as a cracked block. Call (844) 796 7968 before you add anything else.

Can I drive normally after a head gasket sealer repair?

With Thermalweld you drive normally while the seal cures over three days, bringing the engine up to operating temperature at least four times. Watch the temperature gauge, and if it climbs, pull over and shut it off.

More answers

This page is a guide, not a diagnosis. Call (844) 796 7968 with your engine, mileage and symptoms.