Does Head Gasket Sealer Damage an Engine? The Real Risks

Should I fix it?

Does head gasket sealer damage an engine? The real risks, and how to avoid them

It can, when it goes into the wrong engine or the steps get skipped. Followed step by step, on an engine that starts and runs and with the cause fixed, Thermalweld will not clog anything in the cooling system, radiator and heater core included, and it is designed to be a permanent repair.

We are the experts in cooling systems. We find what caused the failure, not only fix the gasket. Here is what really hurts an engine around a head gasket repair, and how a driver or a mechanic avoids each one.

The worry you read about: clogging

Most people asking this have read about clogging. Sealer that stays in a cooling system can build up in small passages, like the tubes of a heater core or radiator, or at the thermostat and water pump. Adding more than the instructions call for can make things worse, not better.

That is why the steps matter as much as the bottle:

  1. Flush the antifreeze out with plain water first, heater core included. Thermalweld does not mix with antifreeze.
  2. Use the amount the instructions say, and no more.
  3. Let it cure. Bring the engine up to operating temperature at least four times over the next three days.
  4. Flush the treatment out, then go back to antifreeze.

Full steps: easy repair instructions.

Five things that really damage an engine around a repair

1. Driving on the breach

The pistons push 100 to 200 psi or more against the gasket on every stroke, and every mile makes the breach bigger. The misfire gets worse, and one day the engine will not start. Drive it as little as you can until it is repaired. If the temperature gauge climbs, pull over and shut it off. More on driving with a blown head gasket.

2. The part that caused it, still in the car

Most head gaskets blow because a cooling system part failed first: a stuck thermostat, a weak water pump, a clogged radiator, a cooling fan that does not come on, or a cap or hose that lets the pressure out. Seal the gasket and leave that part in the car, and the engine overheats again and the new seal usually goes the same way as the old one. Then the bottle gets the blame.

3. A repair for a problem the engine does not have

Plenty of engines get called a blown head gasket with no test behind it. A block test settles it for about $10. Most auto parts stores lend the tester, and a shop charges around $35 to $50. Dave Whitmer, our field technician, shows how: How to do a block test. More on how to tell if your head gasket is blown.

4. Coolant left in the oil

Pull the oil cap. A milky coffee look means coolant in the oil. Then read the dipstick. At the full mark, or an inch or two over, you change the oil after the repair. Five inches or more over can point to a cracked block, so call before you pour anything in. See milky oil under the oil cap.

5. Cranking an engine that will not turn over

It may be hydrolocked: coolant has filled a cylinder and the piston cannot move. Do not keep cranking it. Pull the spark plugs and turn the key so the coolant can come out, then call us.

Will it hurt my heater core, thermostat or radiator?

Followed step by step, Thermalweld will not clog anything in the cooling system, including the radiator and the heater core. The flush before and the flush after are what make that true, so neither one is optional. If a stuck thermostat overheated the engine, it is the cause, so it gets replaced before the repair.

When not to pour anything in

  • It will not start, or will not turn over. The repair works while the engine runs.
  • The dipstick reads five inches or more over the full mark.
  • It keeps overheating from a part nobody has fixed.
  • Another product already went in, and the engine is no better.

In each case, call (844) 796 7968 first.

Is it worth the risk?

A shop usually charges $2,000 to $7,000 to replace a head gasket, and many shops will not quote the job at all; they offer an engine replacement instead. Prices by engine: head gasket repair cost. Repair or replace: can a blown head gasket be fixed without replacing it.

Already tried a sealer that did not work?

Where other products failed, we help you fix it. Before anything else goes in, call and tell us what went in and what the engine does now.

Free unlimited tech support from the people who make it

Call (844) 796 7968 at any step. You talk to the people who make Thermalweld, as often as you need, free. Nobody else in the industry offers that. Thermalweld is BBB accredited and A+ rated.

We are saving livelihoods one blown head gasket at a time.

For mechanics and repair shops

Your customer asks whether the bottle will hurt the engine. The answer is the order you already work in: confirm it, fix the part that caused it, flush, seal it with the head on, and flush again. Call us whenever the job gets tough. Unheard of in the industry. Nobody else comes close.

Mechanics: your first bottle is free. So is the unlimited tech support. thermalweld.com/technicians

Need a mobile mechanic? We find one for you.

Call (844) 796 7968 and tell us where the car is. At our cost, we call mobile mechanics in your area, qualify a well reviewed one for your job, and back them with free, unlimited tech support from start to finish. We know of no other head gasket brand that does this. How we find your mechanic

Quick answers

Does head gasket sealer damage an engine?

It can, when it goes into the wrong engine or the steps get skipped. Confirm it with a block test, fix the part that caused it, flush the antifreeze out first and follow the instructions step by step. Call (844) 796 7968 if you are unsure.

Is head gasket sealer bad for your car?

Used on the right engine with the steps followed, it usually is not. What usually hurts a car is driving on the breach, an overheating part nobody fixed, or coolant left in the oil.

Can head gasket sealer damage the heater core or thermostat?

Followed step by step, Thermalweld will not clog anything in the cooling system, heater core included. Flush the antifreeze out with plain water first and flush the treatment out after. A thermostat that stuck and caused the overheating is replaced before the repair.

Is head gasket sealer safe to use?

Follow the steps, use the amount the instructions say, and never open the radiator cap until the engine has cooled completely. Call first if the engine will not start or the dipstick reads five inches or more over the full mark.

Is head gasket sealer worth it?

Often, when the engine still starts and runs and the other choice is a $2,000 to $7,000 replacement. Do a $10 block test first, then call us with your engine, mileage and symptoms.

More answers

This page is a guide, not a diagnosis. Call (844) 796 7968 with your engine, mileage and symptoms.