Can a Blown Head Gasket Cause Overheating? Yes, in Two Ways
Is it my head gasket?
Can a blown head gasket cause overheating? Yes, in two ways
Yes. A blown head gasket can make an engine overheat in two ways: gas pushed into the cooling system traps an air pocket at the thermostat so it never opens, or coolant leaves out the tail pipe as steam until the level is too low. More often it runs the other way: a cooling system part fails, the engine overheats, and the gasket blows.
We are the experts in cooling systems. We find what caused the failure, not only fix the gasket.
Way 1: exhaust gets into the cooling system
A breached head gasket lets combustion gas from a cylinder into the coolant. With the engine running you may see bubbles rising in the coolant reservoir.
On its own, that gas does not usually make an engine run hot. It does when enough of it builds up:
- An air pocket forms around the thermostat. Hot coolant never touches it, so it never opens, and the engine overheats.
- The gas pushes coolant out. Bubbling can push coolant into the overflow tank, so less is left in the engine to cool it.
Way 2: the coolant leaves as steam
Coolant that gets past the gasket into a cylinder flashes to steam and leaves through the exhaust. Sometimes it is a white cloud. Often it is a fine mist you cannot see at 60 mph. Either way the level drops, and low coolant overheats any engine. More on white smoke and losing coolant with no leak.
Usually, the overheating came first
Most head gaskets blow because a cooling system part failed first:
- a stuck thermostat
- a weak water pump
- a clogged radiator
- a cooling fan that does not come on
- a cap, radiator or hose that lets the pressure out
On a high mileage engine, over 150,000 miles, an old gasket can wear out under 100 to 200 psi or more of pressure from the pistons, with no overheating at all.
If it overheated and nobody found out why, assume two problems: a blown head gasket and a part that is still failing. Fix the part, or a repaired gasket goes the same way as the last one.
Losing coolant, or a full tank?
- Overheating and losing coolant, with no puddle. The head gasket is the first suspect, because the coolant is likely leaving out the tail pipe. A pressure cap that does not hold, or a leak that opens only when the engine is hot, can do it too.
- Overheating with the coolant full. A blown head gasket always loses coolant, so look at the parts first: the thermostat, the water pump, the radiator, the fan, and air trapped in the system after a coolant change.
- Overheating that comes and goes, or only at idle. At idle little air moves through the radiator, and the fan does that job, so check that it comes on. If it does, a block test tells you whether gas is building up in the coolant.
Find out which it is
- Check the level cold. Never open the cap until the engine has cooled completely. Note how much you add per 100 miles; under a quart is not a major breach.
- Do a block test, about $10. Most auto parts stores lend the tester, and you buy the fluid. The blue fluid turns yellow when combustion gas is in the coolant. A shop charges around $35 to $50. Dave shows how: How to do a block test.
- Check the parts. Thermostat, water pump, radiator, fan and cap. A positive block test and a failed part means you have both problems.
More on how to tell if your head gasket is blown.
Stop when the gauge climbs
If the temperature gauge climbs, pull over and shut the engine off. Every mile on a blown head gasket makes the breach bigger, and the repair works only while the engine still starts and runs. See can you drive with a blown head gasket.
Can it be fixed without pulling the head?
It can be, when it is the head gasket and the engine still starts and runs. Thermalweld seals the breach from inside the cooling system while the engine runs.
- Confirm it with a block test.
- Fix the cause. Thermostat, water pump, radiator, fan, cap or hose.
- Flush the antifreeze out with plain water, heater core included. Thermalweld does not mix with antifreeze.
- Treat it exactly as the easy repair instructions say, then bring the engine up to operating temperature at least four times over the next three days.
Kits by engine: head gasket repair cost. Call us before you start.
When sealing it is not the answer
- It keeps overheating from a part nobody has fixed. Fix that first, or the new seal fails the same way.
- It will not start, or will not turn over. The repair works while the engine runs. If it will not turn over, do not keep cranking it.
Already tried a sealer that did not work?
Where other products failed, we help you fix it. Before anything else goes in, call us.
Free unlimited tech support from the people who make it
Call (844) 796 7968 at any step. You talk to the people who make Thermalweld, as often as you need, free. Nobody else in the industry offers that. Thermalweld is BBB accredited and A+ rated.
We are saving livelihoods one blown head gasket at a time.
For mechanics
A gasket that blew from overheating is not fixed until you find what overheated it. Block test it running, check the thermostat, pump, radiator, fan and cap, and quote both repairs. When it is the head gasket, fix the cause, seal it with the head on, and call us whenever the job gets tough. Unheard of in the industry. Nobody else comes close.
Mechanics: your first bottle is free. So is the unlimited tech support. thermalweld.com/technicians
Need a mobile mechanic? We find one for you.
Call (844) 796 7968 and tell us where the car is. At our cost, we call mobile mechanics in your area, qualify a well reviewed one for your job, and back them with free, unlimited tech support from start to finish. We know of no other head gasket brand that does this. How we find your mechanic
Quick answers
Can a blown head gasket cause overheating?
Yes, in two ways: gas in the cooling system traps an air pocket at the thermostat so it never opens, or coolant leaves out the tail pipe as steam until the level is too low. Usually, though, the overheating came first and blew the gasket.
Does a blown head gasket always cause overheating?
No. Exhaust in the cooling system does not usually make an engine run hot on its own, and a high mileage gasket can wear out with no overheating at all. What a blown head gasket always does is lose coolant.
Why is my car losing coolant and overheating with no leak?
The coolant is likely leaving where you cannot see it, most often out the tail pipe as steam through a blown head gasket, and low coolant overheats any engine. A block test settles it for about $10. Drive it as little as you can until you know.
Why is my car overheating but not losing coolant?
Look at the cooling system parts first: a stuck thermostat, a weak water pump, a clogged radiator, a fan that does not come on, or air trapped after a coolant change. A blown head gasket always loses coolant.
Will a blown head gasket cause overheating at idle?
It can, in the same two ways. At idle, though, check the cooling fan first, because it moves the air through the radiator when the car is not moving. Then do a block test.
More answers
- Blown head gasket symptoms
- Milky oil under the oil cap
- Can a blown head gasket be fixed without replacing it?
This page is a guide, not a diagnosis. Call (844) 796 7968 with your engine, mileage and symptoms.
