Can a Blown Head Gasket Cause a Misfire? How to Tell

Is it my head gasket?

Can a blown head gasket cause a misfire? Yes, and here is how to tell

Yes. A blown head gasket can make an engine misfire, most often because coolant is getting into a cylinder where the spark plug has to fire, and sometimes because the cylinder is losing compression through the breach. A misfire on its own does not prove it, though: the most common causes of a misfire are a worn spark plug and a failing ignition coil.

We are the experts in cooling systems. We find what caused the failure, not only fix the gasket. Here is how to tell a head gasket misfire from the ordinary kind.

How a blown head gasket makes an engine misfire

Coolant in the cylinder

With a blown head gasket, coolant gets into at least one cylinder, where the piston and the spark plug are. Gas and water do not mix, so that cylinder does not fire cleanly, the engine runs rough, and a check engine light can come on. The coolant flashes to steam and leaves through the tail pipe as white smoke or a fine mist.

Compression leaking out

A breach can also let the pressure out of the cylinder, into the cooling system or into the cylinder next to it. With less compression the fuel does not burn the way it should, and that cylinder misfires. When the breach sits between two cylinders, the two side by side can misfire together.

It gets worse with every mile

The pistons push 100 to 200 psi or more against the gasket on every stroke, so the breach grows, the misfire gets worse, and one day the engine may not start. More on driving with a blown head gasket.

Will a blown head gasket throw a misfire code?

It can. P0300 means random or multiple cylinders are misfiring. P0301 to P0308 name one cylinder by the last digit, so P0302 is cylinder 2. A failed head gasket can set either kind. The code tells you which cylinder is missing, not why.

If the check engine light is flashing, the misfire is severe. Unburned fuel and extra heat can damage the catalytic converter, so drive it as little as possible and get it checked right away.

Does a misfire mean a blown head gasket?

Not by itself. Worn spark plugs and failing ignition coils are the most common causes, and clogged fuel injectors and vacuum leaks cause misfires too. A failed head gasket is on the same list.

What separates a head gasket misfire from the rest is coolant. A blown head gasket is always losing coolant somewhere. If the level holds steady week after week, look at the plugs and coils first.

Five clues that point to the head gasket

  1. You keep adding coolant and cannot find a puddle. Under a quart per 100 miles is not a major breach.
  2. It misfires on the first start of the day and smooths out as it warms up. Coolant can seep into a cylinder overnight and foul the spark plug. Rev it right after a cold start and watch the tail pipe for white smoke or mist.
  3. Two cylinders side by side misfire together. That can point to a breach between them.
  4. The spark plug from the misfiring cylinder comes out wet with coolant.
  5. The misfire stays put when you swap parts. Move the spark plug, or the coil, to another cylinder. If the misfire follows the part, it was the part.

More signs: blown head gasket symptoms.

Tests that settle it

  • Block test, about $10. It checks the coolant for combustion gas. Most auto parts stores lend the tester, and a shop charges around $35 to $50. Dave Whitmer, our field technician, shows how: How to do a block test.
  • Compression test, near $100 or more at a shop. It shows which cylinder is low, or which two.
  • Leak down test. Bubbles rising in the radiator while a cylinder is held under air mean compression is leaking into the cooling system through the head gasket.

A diagnosis from a misfire code alone deserves one of these tests. More on how to tell if your head gasket is blown.

If it is the head gasket

Find what caused it first. Most head gaskets blow because a cooling system part failed: a stuck thermostat, a weak water pump, a clogged radiator, or a fan that does not come on. Fix that part, or the new seal usually goes the same way as the old gasket.

Thermalweld seals the gasket from inside the cooling system with the head on, while the engine still starts and runs. It does not mix with antifreeze, so the system is flushed with plain water first, heater core included. Every step is in the easy repair instructions.

Call before you buy anything if:

  • Two cylinders side by side misfire and you are not losing coolant.
  • It will not turn over. It may be hydrolocked, with coolant filling a cylinder. Do not keep cranking it.
  • The dipstick reads five inches or more over the full mark. That can point to a cracked block. See milky oil under the oil cap.

Already tried a sealer and it still misfires?

Where other products failed, we help you fix it. Before anything else goes in, call and tell us what went in and what the engine does now.

Free unlimited tech support from the people who make it

Call (844) 796 7968 at any step, before, during or after the repair. You talk to the people who make Thermalweld, as often as you need, free. Nobody else in the industry offers that. Thermalweld is BBB accredited and A+ rated.

We are saving livelihoods one blown head gasket at a time.

For mechanics and repair shops

Before you sell plugs and coils on an engine that keeps eating coolant, run the block test. If it is the head gasket, the repair fits the bay or the driveway, and our tech support is on the phone whenever the job gets tough. Unheard of in the industry. Nobody else comes close.

Mechanics: your first bottle is free. So is the unlimited tech support. thermalweld.com/technicians

Need a mobile mechanic? We find one for you.

Call (844) 796 7968 and tell us where the car is. At our cost, we call mobile mechanics in your area, qualify a well reviewed one for your job, and back them with free, unlimited tech support from start to finish. We know of no other head gasket brand that does this. How we find your mechanic

Quick answers

Can a blown head gasket cause a misfire?

Yes. Coolant getting into a cylinder, or compression leaking out of it, can make that cylinder misfire. Worn plugs and failing coils are still the most common causes, so steady coolant loss is what points to the head gasket.

Will a blown head gasket throw a misfire code?

It can. P0300 means random or multiple misfires, and P0301 to P0308 name the cylinder by the last digit. The code says which cylinder is missing, not why, so test before you pay for a repair.

Does a misfire mean a blown head gasket?

Not by itself. A blown head gasket is always losing coolant, so if you are not adding any, look at the plugs and coils first.

Can a blown head gasket cause a misfire only on a cold start?

Yes. Coolant can seep into a cylinder overnight and foul the spark plug, so the engine misfires on the first start and smooths out as it warms.

Can a blown head gasket cause multiple misfires?

Yes. A breach between two cylinders can make both misfire, and a failed head gasket is one of the causes of a random misfire code, P0300. A compression test shows which cylinders are low.

More answers

This page is a guide, not a diagnosis. Call (844) 796 7968 with your engine, mileage and symptoms.