Bad Thermostat or Head Gasket? How to Tell Which It Is
Is it my head gasket?
Bad thermostat or head gasket? How to tell which it is
A bad thermostat makes the engine run too hot or too cold, but it does not make coolant disappear with no leak in sight. A blown head gasket can overheat the engine too, and it also loses coolant you cannot account for, often with white smoke, bubbles in the reservoir or oil in the coolant. A block test tells you which one it is.
We are the experts in cooling systems. We find what caused the failure, not only fix the gasket.
Safety first. Never open the radiator cap or the pressure cap until the engine has cooled completely. If the temperature gauge climbs toward red, pull over when it is safe and shut the engine off.
What the thermostat does
The thermostat is a valve between the engine and the radiator. It holds coolant in the engine while it warms up, then opens so the coolant can flow through the radiator and shed heat. When it sticks, it sticks one of two ways:
- Stuck closed. Coolant cannot reach the radiator, so the engine overheats, often soon after you start driving.
- Stuck open. Coolant flows all the time, so the engine is slow to warm up, the gauge reads low and the heater blows lukewarm.
Signs it is the thermostat
- The gauge climbs fast in normal driving, then keeps going.
- The gauge stays low and the heat is weak, even on the highway.
- The gauge swings up and down for no reason you can see.
- One radiator hose hot and the other cool while the engine runs hot, or a radiator that stays cool to the touch.
- Coolant at the thermostat housing, a leak you can see on the outside of the engine.
- The coolant level holds steady from one cold morning to the next.
Signs it is the head gasket
- The coolant level keeps dropping and you find no leak under the car.
- White smoke from the exhaust, often with a sweet smell.
- Bubbles in the reservoir with the engine running.
- Oil in the coolant, or milky oil on the dipstick.
- A new thermostat did not cure it. The engine still runs hot, or still uses coolant.
Both can make the engine overheat. A thermostat problem usually stops there. Coolant loss, smoke or oil in the coolant point at the gasket, and a block test confirms it.
Can a bad thermostat cause a blown head gasket?
Yes. A thermostat stuck closed keeps coolant out of the radiator, the engine overheats, and that heat can warp the cylinder head and blow the gasket. That is why we look for the cause on every blown head gasket. Most head gaskets blow after a cooling system part failed first: a stuck thermostat, a weak water pump, a clogged radiator or a fan that does not come on.
So when the gauge heads for red, stop driving. A few more miles can turn a thermostat job into a head gasket job.
Four checks, cheapest first
- Read the coolant level cold. Park on level ground and check it each morning before the first start. A level that holds points away from the gasket.
- Watch the gauge from a cold start. A fast climb points to a thermostat stuck closed. A gauge that stays low with weak heat points to one stuck open.
- Feel the radiator hoses once the engine is warm. One hot and one cool while the engine runs hot means no flow through the radiator. A stuck thermostat is the usual suspect, though a water pump or a clogged radiator can do the same. Touch them briefly, hands clear of the fan.
- Block test before you replace anything big. If the level drops, the reservoir bubbles or the engine still runs hot after a new thermostat, run a block test, which checks the coolant for combustion gas. Most auto parts stores lend the testers; the block test fluid costs about $10, and a shop charges around $35 to $50. Dave Whitmer, our field technician, shows how: How to do a block test.
More on how to tell if your head gasket is blown.
Fix the cause, not only the symptom
A stuck thermostat or a leaking housing is replaced, and on most cars that is a quick and simple repair. A thermostat is not a Thermalweld job.
When the block test shows combustion gas and the engine still starts and runs, a blown head gasket can be sealed with the head on. Thermalweld seals the breach from inside the cooling system while the engine runs. It does not mix with antifreeze, so the system is flushed with plain water first. Every step is in the easy repair instructions. More on whether a blown head gasket can be fixed without replacing it.
If a stuck thermostat caused the overheating, it gets replaced too. Seal the gasket and leave the cause, and the engine runs hot again.
Free unlimited tech support from the people who make it
Not sure if it is the thermostat or the gasket? Call (844) 796 7968 with the engine, the mileage, what the gauge does and how much coolant you add. You talk to the people who make Thermalweld, as often as you need, free. Nobody else in the industry offers that. Where other products failed, we help you fix it. Thermalweld is BBB accredited and A+ rated.
We are saving livelihoods one blown head gasket at a time.
For mechanics and repair shops
Before you quote a head gasket, read live coolant temperature on a scan tool against the dash gauge, feel the hoses and check the housing. Before you sell a thermostat on an engine that is losing coolant, block test it running. A dropping level and a positive block test on an engine that starts and runs is the job Thermalweld was built for. Our tech support is on the phone whenever the job gets tough. Unheard of in the industry. Nobody else comes close.
Mechanics: your first bottle is free. So is the unlimited tech support. thermalweld.com/technicians
Need a mobile mechanic? We find one for you.
Call (844) 796 7968 and tell us where the car is. At our cost, we call mobile mechanics in your area, qualify a well reviewed one for your job, and back them with free, unlimited tech support from start to finish. We know of no other head gasket brand that does this. How we find your mechanic
Quick answers
Is it my thermostat or my head gasket?
If the engine runs hot or cold and the coolant level holds, suspect the thermostat. If the level keeps dropping with no leak, or you see white smoke or bubbles, block test for the head gasket.
Can a bad thermostat cause a blown head gasket?
Yes. Stuck closed, it lets the engine overheat, and that heat can warp the head and blow the gasket. Stop driving when the gauge heads for red.
What are the signs of a thermostat stuck closed?
The gauge climbs fast in normal driving, one radiator hose stays cool while the engine runs hot, and coolant may seep at the housing.
Can a bad thermostat cause white smoke?
Not usually. White smoke with coolant loss points to coolant burning in the cylinders, a head gasket sign. A thermostat that overheats the engine can lead to a blown gasket, and then you see both.
Will a new thermostat fix overheating?
If the thermostat was stuck, yes. If the engine still runs hot or keeps losing coolant after a new one, block test it.
More answers
- Blown head gasket symptoms
- White smoke from the exhaust and losing coolant
- Can you drive with a blown head gasket?
- Head gasket repair cost
This page is a guide, not a diagnosis. Call (844) 796 7968 with your engine, mileage and symptoms.
